Toro Titan & Titan MAX Parts: 54" and 60" Blades, Belts and Filters

Toro's Titan and Titan MAX zero-turns account for more than 420 parts installed in our repair records. Here's what fits — blades and belts by deck size from Toro's parts lists, plus the tune-up parts we use most.

Quick reference

Toro Titan blades

• 54" deck: three 115-9650-03 18.75" high-flow blades $26.06 (Titan 75302, Titan MyRIDE 54 75312 and others).
• 60" deck: three 115-9649-03 20.5" high-flow blades $26.06 (Titan MAX MyRIDE 60 76609 and others).

Replace blades as a set and balance them — an unbalanced blade wears spindle bearings fast.

Titan deck belts and drive belts

• 54" decks (75302, 75305, 75312, 75315): 133-7076 $127.29.
• 60" decks (75313, 75316): 133-4372 $142.83. Titan HD 2000 60" (74462) uses the 126-7733 $196.22 deck belt — check your model.
• Titan ZX/MX 5400 & 6000: deck belts 133-1167 $146.54 / 133-1168 $134.25; confirm by model.
• Hydro pump drive belt: 145-6363 $34.14 is listed on 8 Titan models in our data.

Belt part numbers vary by serial range — verify yours in Parts for My Machine.

Titan hydro filter: 109-3321

Toro's parts lists show the Hydro-Gear filter 109-3321 $39.90 on 24 Titan models. Pair it with Toro Hypr-Oil 500 $21.71 (12 Titan repair orders in our records) and see our hydro service guide.

Most-installed tune-up parts on Titans

From our service department's repair records, the parts we install most on Titans are:

• NGK BKR5E spark plugs $6.20 (15 orders) and BPR6ES $6.24 (8).
• Oil filters: Toro 136-7848 $20.45, Kohler 52 050 02-S $13.58 and 12 050 01-S $16.91 — depending on engine.
• Toro 10W-30 $53.39 and Kohler 10W-30 synthetic blend $9.94 oil.
• Choke cable 161-6626 $45.81 (12 orders) — a common failure on Titans that start hard cold.
• Flat idler pulley 132-9424 $43.45 and Kohler 24 050 13-S fuel filter $15.79.

Air filters on Titans depend on the engine: Toro's parts lists show 108-3811 $23.33 on several Titan models and the 136-7806 kit $26.06 on Titan HD 1500 models.

Titan generations

"Titan" covers several generations: older Titan ZX and MX models (74862, 74863, 74892, 74893), Titan HD 1500/2000/2500 (744xx), the 54" and 48" Titans (753xx) and the current Titan MAX (765xx–766xx). Blades and belts are generation-specific, so always start with the model number on the frame tag.

Signs your Titan needs these parts

• Uneven cut or scalping: dull or bent blades, or worn spindle bearings.
• Belt squeal on engagement: glazed deck belt or a weak tension spring.
• Weak on hills when warm: hydro filter and fluid.
• Hard cold starts: check the choke cable before the carburetor.

Parts in this guide

Blade-hi Flo, 18.75 Inch 115-9650-03$26.06Blade-hi Flo, 20.5IN 115-9649-03$26.06Toro Timecutter 54 inch HD Deck Belt (133-7076)$127.29Toro 60″ TimeCutter HD Deck Belt (133-4372)$142.83V-belt (A SEC 66.30 EL) 145-6363$34.14Element-oil Filter, HYD 109-3321$39.90Choke Cable 161-6626$45.81Spark Plug NGK BKR5E$6.20

FAQ

What blades fit a Toro Titan 54"?

Toro 115-9650-03 18.75" high-flow blades, three per deck.

What blades fit a Toro Titan MAX 60"?

Toro 115-9649-03 20.5" high-flow blades, three per deck.

What hydro filter does a Toro Titan use?

Many Titan models use the Hydro-Gear filter Toro 109-3321.

Related guides

• Toro Z Master 4000 Parts: Blades, Deck Belts, Filters & Most-Replaced Parts
• Toro TimeCutter Parts by Deck Size: 42", 50" & 54" Blades, Belts and Filters
• Toro Z Master 3000, 5000, 6000 & 7000 Parts: Blades, Deck Belts & Hydro Filters
• Toro Mower Blade Cross Reference Chart (OEM to Rotary & Oregon)
• Toro Mower Belt Cross Reference Chart (Deck & Drive Belts)
• Toro Hypr-Oil 500: Sizes, Part Numbers & the Hydro Filters to Change With It

Repair statistics in this guide are aggregated from our service department's repair records. Part numbers come from manufacturer parts lists; always confirm fitment with your model and serial number.