Toro 8000 Series Direct Collect 42" Bagger Unit (74315)

  • $18,499.00
    Unit price per 
Shipping calculated at checkout.

Featuring a 42" (106.7 cm) cutting deck and added power of a 25 HP Kohler® Command Pro 725cc Engine. The rear-discharge deck lets you trim on either side while keeping flower beds and walkways clipping-free. And the high-capacity collection system helps extend mowing time. With ground speeds up to 7 mph, the 8000 Series is the answer for a perfect cut in less time.


 View Larger

Bag, Mulch or Both

The fill-reduction system lets you switch from 100% bagging to 75% mulching and 25% bagging, so the hopper can be emptied less frequently.

View Larger
Effortless Controls

No need to muscle these mowers around. The controls let you maneumver in tight spots almost effortlessly.

View Larger
High Capacity

The 9.5-bushel hopper means less time emptying and more time mowing. Exclusive baffle design fills evenly back to front for maximum efficiency.

View Larger
Out Front Deck Design

The out-front deck design allows for more maneuverability and mowing in tighter areas where traditional zero turns can't get to.

View Larger
Tough, Deep Decks

Commercial deck is made of welded 7/10 gauge-steel. The deep 4-5/8" design handles taller grass and provides greater vacuum for a clean, refined cut.

View Larger
Trim On Both Sides

The rear discharge deck allows for trimming on either side keeping flower beds and walkways clipping-free.


  • Engine
    25 HP (18.6 kw) Kohler® Command Pro 725cc*
  • Fuel Capacity
    Gas/7.5 gal (28.4 L)
  • Cutting Width
    42" (106.7 cm)
  • Adjustable Discharge Baffle
    Fill reduction baffles standard
  • Air Filter
    Heavy-Duty Canister Air Cleaner
  • Blade Tip Speed
    18,500 ft/min (5,640 m/min)
  • Blade Type
    .164" (.417 cm) heat-treated steel
  • Carrier Frame
    2" x 1.5" x 11 gauge (5.1 cm x 3.8 cm x 11 gauge)
  • Caster Tires
    8" X 3" – 4” (20.3 cm x 7.6 cm – 10.2 cm) Semi Pneumatic
  • Clutch
    Mechanical (lever-operated)
  • Deck Design
    7/10 gauge
  • Drive System
    Tandem Pumps (12cc/rev) & Wheel Motors (18 cir)
  • Drive Tires
    18" x 10.5" – 10" (45.7 cm x 26.7 cm – 25.4 cm)
  • Engine Horsepower
    25 HP
  • Engine Displacement
  • Ground Speed
    Up to 7.0 mph forward (11.4 km/h)
  • Height of Cut
    1" - 4" (.25" increments) 2.5 cm – 10.2 cm (.6 cm increments)
  • Hopper Capacity
    9.5 bushels (76 gallons)
  • Hour Meter
  • Ignition
  • Seat
    Rubber Mounted
  • Spindle Housing
    Cast Iron Gearbox
  • Steering Controls
    Hand Control Levers
  • Weight
    1,140 lbs. (517.1 kg)
  • Disclaimer
    *The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.