How to Install a 147-8791 Toro Hour Meter with Simple Steps

 

Need Instructions On Installing a 147-8791 Hour Meter? Here is How! 

 

BUY A 147-8791 TORO HOUR METER 

 

1. Remove the control panel on the machine by removing the bolt and sliding the control panel forward (Figure 1).

1. 

   Figure 1

    

   1. Bolt
   2. Control panel

2. Locate the cutout location for the hour meter in the control panel and cut an “X” pattern in the decal (Figure 2).

   

   Figure 2

    

   1. Cutout location

3. Install the hour meter into the cutout, ensuring that the hourglass symbol is facing towards the throttle (Figure 3).

   

   Figure 3

    

   1. Hour meter
   2. Hourglass symbol
   3. Cutout in the control panel

4. Locate the main wire harness leading to the key switch and the hour-meter connector affixed to the harness (Figure 4).

   

   Figure 4

    

   1. Wire harness
   2. Key switch
   3. Hour-meter connector

5. Connect the hour meter to the hour-meter connector.

6. Install the control panel; reverse the steps in step 1.